Articles | Volume 11, issue 6
https://doi.org/10.5194/gmd-11-2153-2018
© Author(s) 2018. This work is distributed under
the Creative Commons Attribution 4.0 License.
the Creative Commons Attribution 4.0 License.
https://doi.org/10.5194/gmd-11-2153-2018
© Author(s) 2018. This work is distributed under
the Creative Commons Attribution 4.0 License.
the Creative Commons Attribution 4.0 License.
Methods for assessment of models
| 
12 Jun 2018
Methods for assessment of models |
| 12 Jun 2018
| 12 Jun 2018
Automated model optimisation using the Cylc workflow engine (Cyclops v1.0)
Richard M. Gorman
CORRESPONDING AUTHOR
National Institute of Water and Atmospheric Research, P.O. Box 11-115,
Hamilton, New Zealand
Hilary J. Oliver
National Institute of Water and Atmospheric Research, Private Bag
14901, Wellington, New Zealand
Related authors
Rafael Santana, Richard Gorman, Emily Lane, Stuart Moore, Cyprien Bosserelle, Glen Reeve, and Christo Rautenbach
Geosci. Model Dev., 18, 4877–4898, https://doi.org/10.5194/gmd-18-4877-2025, https://doi.org/10.5194/gmd-18-4877-2025, 2025
Short summary
Short summary
This research explores improving wave forecasts in Aotearoa New Zealand, particularly at Banks Peninsula and Baring Head. We used detailed models and found that forecasts at Baring Head improved significantly due to its narrow geography, but changes at Banks Peninsula were minimal. The study demonstrates that local conditions greatly influence the effectiveness of wave prediction models, highlighting the need for tailored approaches in coastal forecasting to enhance accuracy in the predictions.
Rafael Santana, Richard Gorman, Emily Lane, Stuart Moore, Cyprien Bosserelle, Glen Reeve, and Christo Rautenbach
Geosci. Model Dev., 18, 4877–4898, https://doi.org/10.5194/gmd-18-4877-2025, https://doi.org/10.5194/gmd-18-4877-2025, 2025
Short summary
Short summary
This research explores improving wave forecasts in Aotearoa New Zealand, particularly at Banks Peninsula and Baring Head. We used detailed models and found that forecasts at Baring Head improved significantly due to its narrow geography, but changes at Banks Peninsula were minimal. The study demonstrates that local conditions greatly influence the effectiveness of wave prediction models, highlighting the need for tailored approaches in coastal forecasting to enhance accuracy in the predictions.
Related subject area
Numerical methods
Stabilized two-phase material point method for hydromechanical coupling problems in solid–fluid porous media
asQ: parallel-in-time finite element simulations using ParaDiag for geoscientific models and beyond
Optimized step size control within the Rosenbrock solvers for stiff chemical ordinary differential equation systems in KPP version 2.2.3_rs4
Potential-based thermodynamics with consistent conservative cascade transport for implicit large eddy simulation: PTerodaC3TILES version 1.0
Positive matrix factorization of large real-time atmospheric mass spectrometry datasets using error-weighted randomized hierarchical alternating least squares
Numerical simulations of ocean surface waves along the Australian coast with a focus on the Great Barrier Reef
CLAQC v1.0 – Country Level Air Quality Calculator: an empirical modeling approach
Hydro-geomorphological modelling of leaky wooden dam efficacy from reach to catchment scale with CAESAR-Lisflood 1.9j
Enhancing single precision with quasi-double precision: achieving double-precision accuracy in the Model for Prediction Across Scales – Atmosphere (MPAS-A) version 8.2.1
Advances in land surface forecasting: a comparison of LSTM, gradient boosting, and feed-forward neural networks as prognostic state emulators in a case study with ecLand
Subgrid corrections for the linear inertial equations of a compound flood model – a case study using SFINCS 2.1.1 Dollerup release
Introducing Iterative Model Calibration (IMC) v1.0: a generalizable framework for numerical model calibration with a CAESAR-Lisflood case study
The discontinuous Galerkin coastal and estuarine modelling system (DGCEMS v1.0.0): a three-dimensional, mode-nonsplit, implicit-explicit Runge–Kutta hydrostatic model
Development of a high-order global dynamical core using the discontinuous Galerkin method for an atmospheric large-eddy simulation (LES) and proposal of test cases: SCALE-DG v0.8.0
An extension of the WeatherBench 2 to binary hydroclimatic forecasts
A joint reconstruction and model selection approach for large-scale linear inverse modeling (msHyBR v2)
Assimilation of snow water equivalent from AMSR2 and IMS satellite data utilizing the local ensemble transform Kalman filter
The Paleochrono-1.1 probabilistic model to derive a common age model for several paleoclimatic sites using absolute and relative dating constraints
Models of buoyancy-driven dykes using continuum plasticity and fracture mechanics: a comparison
Explicit stochastic advection algorithms for the regional-scale particle-resolved atmospheric aerosol model WRF-PartMC (v1.0)
GraphFlow v1.0: approximating groundwater contaminant transport with graph-based methods – an application to fault scenario selection
The Measurement Error Proxy System Model: MEPSM v0.2
Numerical stabilization methods for level-set-based ice front migration
Modelling chemical advection during magma ascent
Consistent point data assimilation in Firedrake and Icepack
A computationally efficient parameterization of aerosol, cloud and precipitation pH for application at global and regional scale (EQSAM4Clim-v12)
Assessing the benefits of approximately exact step sizes for Picard and Newton solver in simulating ice flow (FEniCS-full-Stokes v.1.3.2)
Assessing effects of climate and technology uncertainties in large natural resource allocation problems
Isogeometric analysis of the lithosphere under topographic loading: Igalith v1.0.0
VISIR-2: ship weather routing in Python
Incremental analysis update (IAU) in the Model for Prediction Across Scales coupled with the Joint Effort for Data assimilation Integration (MPAS–JEDI 2.0.0)
Decision-making strategies implemented in SolFinder 1.0 to identify eco-efficient aircraft trajectories: application study in AirTraf 3.0
Developing meshing workflows in Gmsh v4.11 for the geologic uncertainty assessment of high-temperature aquifer thermal energy storage
Development and preliminary validation of a land surface image assimilation system based on the Common Land Model
NorSand4AI: a comprehensive triaxial test simulation database for NorSand constitutive model materials
ParticleDA.jl v.1.0: a distributed particle-filtering data assimilation package
HETerogeneous vectorized or Parallel (HETPv1.0): an updated inorganic heterogeneous chemistry solver for the metastable-state NH4+–Na+–Ca2+–K+–Mg2+–SO42−–NO3−–Cl−–H2O system based on ISORROPIA II
Three-dimensional geological modelling of igneous intrusions in LoopStructural v1.5.10
Estimating volcanic ash emissions using retrieved satellite ash columns and inverse ash transport modeling using VolcanicAshInversion v1.2.1, within the operational eEMEP (emergency European Monitoring and Evaluation Programme) volcanic plume forecasting system (version rv4_17)
Accounting for uncertainties in forecasting tropical-cyclone-induced compound flooding
An automatic mesh generator for coupled 1D–2D hydrodynamic models
Numerical coupling of aerosol emissions, dry removal, and turbulent mixing in the E3SM Atmosphere Model version 1 (EAMv1) – Part 1: Dust budget analyses and the impacts of a revised coupling scheme
Numerical coupling of aerosol emissions, dry removal, and turbulent mixing in the E3SM Atmosphere Model version 1 (EAMv1) – Part 2: A semi-discrete error analysis framework for assessing coupling schemes
jsmetrics v0.2.0: a Python package for metrics and algorithms used to identify or characterise atmospheric jet streams
P3D-BRNS v1.0.0: a three-dimensional, multiphase, multicomponent, pore-scale reactive transport modelling package for simulating biogeochemical processes in subsurface environments
MinVoellmy v1: a lightweight model for simulating rapid mass movements based on a modified Voellmy rheology
Scalable Feature Extraction and Tracking (SCAFET): a general framework for feature extraction from large climate data sets
Sweep interpolation: a cost-effective semi-Lagrangian scheme in the Global Environmental Multiscale model
CHONK 1.0: landscape evolution framework: cellular automata meets graph theory
Perspectives of physics-based machine learning strategies for geoscientific applications governed by partial differential equations
Xiong Tang, Wei Liu, Siming He, Lei Zhu, Michel Jaboyedoff, Huanhuan Zhang, Yuqing Sun, and Zenan Huo
Geosci. Model Dev., 18, 4743–4758, https://doi.org/10.5194/gmd-18-4743-2025, https://doi.org/10.5194/gmd-18-4743-2025, 2025
Short summary
Short summary
The paper presents an explicit stabilized two-phase material point method (MPM) based on the one-point two-phase MPM scheme. The novelty of the work lies in the employment of stabilized techniques, including the strain smoothing method and the multi-field variational principle. With its effective and easy-to-implement stabilized techniques, the proposed model offers an effective and reliable approach for simulating both static and dynamic processes in solid–fluid porous media.
Joshua Hope-Collins, Abdalaziz Hamdan, Werner Bauer, Lawrence Mitchell, and Colin Cotter
Geosci. Model Dev., 18, 4535–4569, https://doi.org/10.5194/gmd-18-4535-2025, https://doi.org/10.5194/gmd-18-4535-2025, 2025
Short summary
Short summary
Effectively using modern supercomputers requires massively parallel algorithms. Time-parallel algorithms calculate the system state (e.g. the atmosphere) at multiple times simultaneously and have exciting potential but are tricky to implement and still require development. We have developed software to simplify implementing and testing the ParaDiag algorithm on supercomputers. We show that for some atmospheric problems it can enable faster or more accurate solutions than traditional techniques.
Raphael Dreger, Timo Kirfel, Andrea Pozzer, Simon Rosanka, Rolf Sander, and Domenico Taraborrelli
Geosci. Model Dev., 18, 4273–4291, https://doi.org/10.5194/gmd-18-4273-2025, https://doi.org/10.5194/gmd-18-4273-2025, 2025
Short summary
Short summary
Model simulations are essential for understanding the interactions between atmospheric composition and weather. However, models including chemistry are very slow. Hence, any computation speedup of such models is important for understanding the role of atmospheric chemistry within the Earth system. In this study we analyzed and optimized the time step for chemistry calculations. Our results show that atmospheric models could be run notably faster without any loss in accuracy.
John Thuburn
Geosci. Model Dev., 18, 3331–3357, https://doi.org/10.5194/gmd-18-3331-2025, https://doi.org/10.5194/gmd-18-3331-2025, 2025
Short summary
Short summary
A new computational fluid dynamics code for simulating the atmospheric boundary layer and convection is presented. Moist thermodynamics is formulated via thermodynamic potentials, avoiding inconsistencies that can be introduced with conventional approaches. Numerical methods typical of weather and climate models are used, with no explicit subgrid scheme. Results highlight some advantages (e.g. large time steps) and disadvantages (e.g. weak vertical fluxes near the surface) of this approach.
Benjamin C. Sapper, Sean Youn, Daven K. Henze, Manjula Canagaratna, Harald Stark, and Jose L. Jimenez
Geosci. Model Dev., 18, 2891–2919, https://doi.org/10.5194/gmd-18-2891-2025, https://doi.org/10.5194/gmd-18-2891-2025, 2025
Short summary
Short summary
Positive matrix factorization (PMF) has been used by atmospheric scientists to extract underlying factors present in large datasets. This paper presents a new technique for error-weighted PMF that drastically reduces the computational costs of previously developed algorithms. We use this technique to deliver interpretable factors and solution diagnostics from an atmospheric chemistry dataset.
Xianghui Dong, Qingxiang Liu, Stefan Zieger, Alberto Alberello, Ali Abdolali, Jian Sun, Kejian Wu, and Alexander V. Babanin
EGUsphere, https://doi.org/10.5194/egusphere-2025-698, https://doi.org/10.5194/egusphere-2025-698, 2025
Short summary
Short summary
Ocean surface wave research is vital for coastal management, marine ecology, and ocean engineering. This study simulates waves along the Australian coast using advanced physical and numerical schemes. Model verification with altimeter and buoy data shows good performance. A two-step parameterization improves accuracy in the complex Great Barrier Reef. This study will help us better understand coastal wave climates and assess sea states, enabling us to better develop, protect, and use the sea.
Stefania Renna, Francesco Granella, Lara Aleluia Reis, and Paulina Schulz-Antipa
Geosci. Model Dev., 18, 2373–2408, https://doi.org/10.5194/gmd-18-2373-2025, https://doi.org/10.5194/gmd-18-2373-2025, 2025
Short summary
Short summary
The Country Level Air Quality Calculator (CLAQC) is a new fast modeling tool that predicts globally country-level monthly and annual concentrations of two major air pollutants, fine particulate matter (PM2.5) and tropospheric ozone (O3). It was designed to inform national and regional climate and pollution mitigation policies. It is easy to use and computationally efficient, allowing for the simulation of a large number of emission scenarios for policy assessments and optimization frameworks.
Joshua M. Wolstenholme, Christopher J. Skinner, David Milan, Robert E. Thomas, and Daniel R. Parsons
Geosci. Model Dev., 18, 1395–1411, https://doi.org/10.5194/gmd-18-1395-2025, https://doi.org/10.5194/gmd-18-1395-2025, 2025
Short summary
Short summary
Leaky wooden dams are a type of natural flood management intervention that aims to reduce flood risk downstream by temporarily holding back water during a storm event and releasing it afterwards. These structures alter the river hydrology, and therefore the geomorphology, yet often this is excluded from numerical models. Here we show that by not simulating geomorphology, we are currently underestimating the efficacy of these structures to reduce the flood peak and store water.
Jiayi Lai, Lanning Wang, Qizhong Wu, Yizhou Yang, and Fang Wang
Geosci. Model Dev., 18, 1089–1102, https://doi.org/10.5194/gmd-18-1089-2025, https://doi.org/10.5194/gmd-18-1089-2025, 2025
Short summary
Short summary
High-performance computing limitations often hinder numerical model development. Traditional models use double precision for accuracy, which is computationally expensive. Lower precision reduces costs but can introduce errors. The quasi-double-precision (QDP) algorithm helps mitigate these errors. This study applies the QDP algorithm to the Model for Prediction Across Scales – Atmosphere, showing reduced errors and computational time, making it an efficient solution for large-scale simulations.
Marieke Wesselkamp, Matthew Chantry, Ewan Pinnington, Margarita Choulga, Souhail Boussetta, Maria Kalweit, Joschka Bödecker, Carsten F. Dormann, Florian Pappenberger, and Gianpaolo Balsamo
Geosci. Model Dev., 18, 921–937, https://doi.org/10.5194/gmd-18-921-2025, https://doi.org/10.5194/gmd-18-921-2025, 2025
Short summary
Short summary
We compared spatiotemporal forecasts of three machine learning models that learned water and energy
states on the land surface from a physical model scheme. The forecasting models were developed with reanalysis data and simulations on a European scale and transferred to the globe. We found that all approaches deliver highly accurate approximations of the physical dynamic at long time horizons, implying their usefulness to advance land surface forecasting with synthetic data.
states on the land surface from a physical model scheme. The forecasting models were developed with reanalysis data and simulations on a European scale and transferred to the globe. We found that all approaches deliver highly accurate approximations of the physical dynamic at long time horizons, implying their usefulness to advance land surface forecasting with synthetic data.
Maarten van Ormondt, Tim Leijnse, Roel de Goede, Kees Nederhoff, and Ap van Dongeren
Geosci. Model Dev., 18, 843–861, https://doi.org/10.5194/gmd-18-843-2025, https://doi.org/10.5194/gmd-18-843-2025, 2025
Short summary
Short summary
Accurate flood risk assessments are crucial for storm protection. To achieve efficiency, computational costs must be minimized. This paper introduces a novel subgrid approach for linear inertial equations (LIEs) with bed level and friction variations, implemented in the Super-Fast INundation of CoastS (SFINCS) model. Pre-processed lookup tables enhance simulation precision with lower costs. Validations show significant accuracy improvement even at coarser resolutions.
Chayan Banerjee, Kien Nguyen, Clinton Fookes, Gregory Hancock, and Thomas Coulthard
Geosci. Model Dev., 18, 803–818, https://doi.org/10.5194/gmd-18-803-2025, https://doi.org/10.5194/gmd-18-803-2025, 2025
Short summary
Short summary
In geosciences, the reliance on numerical models necessitates the precise calibration of their parameters to effectively translate information from observed to unobserved settings. We introduce a generalizable framework for calibrating numerical models, with a case study of the geomorphological model CAESAR-Lisflood. This approach efficiently identifies the optimal set of parameters for a given numerical model, enabling retrospective and prospective analyses at various temporal resolutions.
Zereng Chen, Qinghe Zhang, Guoquan Ran, and Yang Nie
Geosci. Model Dev. Discuss., https://doi.org/10.5194/gmd-2024-240, https://doi.org/10.5194/gmd-2024-240, 2025
Revised manuscript accepted for GMD
Short summary
Short summary
This study presents the development of a novel three-dimensional discontinuous Galerkin coastal and estuarine modelling system, DGCEMS. The model have low spurious mixing, a second-order convergence of surface water elevation, horizontal velocity and tracer field. It has the capability to simulate salt-freshwater interactions in the presence of wetting and drying boundaries.
Yuta Kawai and Hirofumi Tomita
Geosci. Model Dev., 18, 725–762, https://doi.org/10.5194/gmd-18-725-2025, https://doi.org/10.5194/gmd-18-725-2025, 2025
Short summary
Short summary
When considering future high-resolution atmospheric simulations with O(10–100 m) grid spacing, such as global large-eddy simulations, numerical errors with the conventional low-order dynamical cores can contaminate the effects of turbulent parameterization. To achieve high-order discretization, we developed a global atmospheric dynamical core using the discontinuous Galerkin method (DGM). By conducting several validation tests, we discussed the impact of a high-order DGM on atmospheric flows.
Tongtiegang Zhao, Qiang Li, Tongbi Tu, and Xiaohong Chen
EGUsphere, https://doi.org/10.5194/egusphere-2025-3, https://doi.org/10.5194/egusphere-2025-3, 2025
Short summary
Short summary
The recent WeatherBench 2 provides a versatile framework for the verification of deterministic and ensemble forecasts. In this paper, we present an explicit extension to binary forecasts of hydroclimatic extremes. Sixteen verification metrics for binary forecasts are employed and scorecards are generated to showcase the predictive performance. The extension facilitates more comprehensive comparisons of hydroclimatic forecasts and provides useful information for forecast applications.
Malena Sabaté Landman, Julianne Chung, Jiahua Jiang, Scot M. Miller, and Arvind K. Saibaba
Geosci. Model Dev., 17, 8853–8872, https://doi.org/10.5194/gmd-17-8853-2024, https://doi.org/10.5194/gmd-17-8853-2024, 2024
Short summary
Short summary
Making an informed decision about what prior information to incorporate or discard in an inverse model is important yet very challenging, as it is often not straightforward to distinguish between informative and non-informative variables. In this study, we develop a new approach for incorporating prior information in an inverse model using predictor variables, while simultaneously selecting the relevant predictor variables for the estimation of the unknown quantity of interest.
Joonlee Lee, Myong-In Lee, Sunlae Tak, Eunkyo Seo, and Yong-Keun Lee
Geosci. Model Dev., 17, 8799–8816, https://doi.org/10.5194/gmd-17-8799-2024, https://doi.org/10.5194/gmd-17-8799-2024, 2024
Short summary
Short summary
We developed an advanced snow water equivalent (SWE) data assimilation framework using satellite data based on a land surface model. The results of this study highlight the beneficial impact of data assimilation by effectively combining land surface model and satellite-derived data according to their relative uncertainty, thereby controlling not only transitional regions but also the regions with heavy snow accumulation that are difficult to detect by satellite.
Frédéric Parrenin, Marie Bouchet, Christo Buizert, Emilie Capron, Ellen Corrick, Russell Drysdale, Kenji Kawamura, Amaëlle Landais, Robert Mulvaney, Ikumi Oyabu, and Sune Olander Rasmussen
Geosci. Model Dev., 17, 8735–8750, https://doi.org/10.5194/gmd-17-8735-2024, https://doi.org/10.5194/gmd-17-8735-2024, 2024
Short summary
Short summary
The Paleochrono-1.1 probabilistic dating model allows users to derive a common and optimized chronology for several paleoclimatic sites from various archives (ice cores, speleothems, marine cores, lake cores, etc.). It combines prior sedimentation scenarios with chronological information such as dated horizons, dated intervals, stratigraphic links and (for ice cores) Δdepth observations. Paleochrono-1.1 is available under an open-source license.
Yuan Li, Timothy Davis, Adina E. Pusok, and Richard F. Katz
EGUsphere, https://doi.org/10.5194/egusphere-2024-3504, https://doi.org/10.5194/egusphere-2024-3504, 2024
Short summary
Short summary
Magmatic dykes transport magma to the Earth's surface, sometimes causing eruptions. We advanced a model of dyking, treating it as plastic deformation in a porous medium, unlike the classic model that treats dykes as fractures in elastic solids. Comparing the two, we found the plastic model aligns with the fracture model in dyke speed and energy consumption, despite quantitative differences. This new method could be a powerful tool for understanding volcanic processes during tectonic activity.
Jeffrey H. Curtis, Nicole Riemer, and Matthew West
Geosci. Model Dev., 17, 8399–8420, https://doi.org/10.5194/gmd-17-8399-2024, https://doi.org/10.5194/gmd-17-8399-2024, 2024
Short summary
Short summary
This paper introduces a numerical method for simulating particle-based aerosol transport in atmospheric models. We detail the various numerical properties of the advection order method and demonstrate its implementation in a 3D weather prediction model (WRF) for the first time. Particle-based techniques improve the accuracy of aerosol size and composition predictions, which are key for aerosol–cloud and aerosol–radiation interactions.
Léonard Moracchini, Guillaume Pirot, Kerry Bardot, Mark W. Jessell, and James L. McCallum
Geosci. Model Dev. Discuss., https://doi.org/10.5194/gmd-2024-154, https://doi.org/10.5194/gmd-2024-154, 2024
Revised manuscript accepted for GMD
Short summary
Short summary
To facilitate the exploration of alternative hydrogeological scenarios, we propose to approximate costly physical simulations of contaminant transport by more affordable shortest distances computations. It enables to accept or reject scenarios within a predefined confidence interval. In particular, it can allow to estimate the probability of a fault acting as a preferential path or a barrier.
Matt J. Fischer
Geosci. Model Dev., 17, 6745–6760, https://doi.org/10.5194/gmd-17-6745-2024, https://doi.org/10.5194/gmd-17-6745-2024, 2024
Short summary
Short summary
In paleoclimate research, proxy system models (PSMs) model chemical or biological systems which receive environmental input and output (e.g., geochemical signals). The environmental inputs are rarely noiseless, which causes problems when calibrating multi-input PSMs. Here a PSM is developed which includes generalized noise in both model inputs and outputs and prior information. A quasi-Bayesian method enhances the stability of the solution of the Measurement Error Proxy System Model.
Gong Cheng, Mathieu Morlighem, and G. Hilmar Gudmundsson
Geosci. Model Dev., 17, 6227–6247, https://doi.org/10.5194/gmd-17-6227-2024, https://doi.org/10.5194/gmd-17-6227-2024, 2024
Short summary
Short summary
We conducted a comprehensive analysis of the stabilization and reinitialization techniques currently employed in ISSM and Úa for solving level-set equations, specifically those related to the dynamic representation of moving ice fronts within numerical ice sheet models. Our results demonstrate that the streamline upwind Petrov–Galerkin (SUPG) method outperforms the other approaches. We found that excessively frequent reinitialization can lead to exceptionally high errors in simulations.
Hugo Dominguez, Nicolas Riel, and Pierre Lanari
Geosci. Model Dev., 17, 6105–6122, https://doi.org/10.5194/gmd-17-6105-2024, https://doi.org/10.5194/gmd-17-6105-2024, 2024
Short summary
Short summary
Predicting the behaviour of magmatic systems is important for understanding Earth's matter and heat transport. Numerical modelling is a technique that can predict complex systems at different scales of space and time by solving equations using various techniques. This study tests four algorithms to find the best way to transport the melt composition. The "weighted essentially non-oscillatory" algorithm emerges as the best choice, minimising errors and preserving system mass well.
Reuben W. Nixon-Hill, Daniel Shapero, Colin J. Cotter, and David A. Ham
Geosci. Model Dev., 17, 5369–5386, https://doi.org/10.5194/gmd-17-5369-2024, https://doi.org/10.5194/gmd-17-5369-2024, 2024
Short summary
Short summary
Scientists often use models to study complex processes, like the movement of ice sheets, and compare them to measurements for estimating quantities that are hard to measure. We highlight an approach that ensures accurate results from point data sources (e.g. height measurements) by evaluating the numerical solution at true point locations. This method improves accuracy, aids communication between scientists, and is well-suited for integration with specialised software that automates processes.
Swen Metzger, Samuel Rémy, Jason E. Williams, Vincent Huijnen, and Johannes Flemming
Geosci. Model Dev., 17, 5009–5021, https://doi.org/10.5194/gmd-17-5009-2024, https://doi.org/10.5194/gmd-17-5009-2024, 2024
Short summary
Short summary
EQSAM4Clim has recently been revised to provide an accurate and efficient method for calculating the acidity of atmospheric particles. It is based on an analytical concept that is sufficiently fast and free of numerical noise, which makes it attractive for air quality forecasting. Version 12 allows the calculation of aerosol composition based on the gas–liquid–solid and the reduced gas–liquid partitioning with the associated water uptake for both cases, including the acidity of the aerosols.
Niko Schmidt, Angelika Humbert, and Thomas Slawig
Geosci. Model Dev., 17, 4943–4959, https://doi.org/10.5194/gmd-17-4943-2024, https://doi.org/10.5194/gmd-17-4943-2024, 2024
Short summary
Short summary
Future sea-level rise is of big significance for coastal regions. The melting and acceleration of glaciers plays a major role in sea-level change. Computer simulation of glaciers costs a lot of computational resources. In this publication, we test a new way of simulating glaciers. This approach produces the same results but has the advantage that it needs much less computation time. As simulations can be obtained with fewer computation resources, higher resolution and physics become affordable.
Jevgenijs Steinbuks, Yongyang Cai, Jonas Jaegermeyr, and Thomas W. Hertel
Geosci. Model Dev., 17, 4791–4819, https://doi.org/10.5194/gmd-17-4791-2024, https://doi.org/10.5194/gmd-17-4791-2024, 2024
Short summary
Short summary
This paper applies a cutting-edge numerical method, SCEQ, to show how uncertain climate change and technological progress affect the future utilization of the world's scarce land resources. The paper's key insight is to illustrate how much global cropland will expand when future crop yields are unknown. The study finds the range of outcomes for land use change to be smaller when using this novel method compared to existing deterministic models.
Rozan Rosandi, Yudi Rosandi, and Bernd Simeon
EGUsphere, https://doi.org/10.5194/egusphere-2024-1093, https://doi.org/10.5194/egusphere-2024-1093, 2024
Short summary
Short summary
We model Earth's lithosphere as a thin elastic shell and present numerical methods of isogeometric finite element analysis to simulate its deformation in isostatic equilibrium using technologies from computer-aided design. The simulations also serve as a basis for identifying parameters of the model that are most plausible to explain observed data. This research has been done to showcase the capabilities of isogeometric analysis in solving higher-order problems in geoscientific applications.
Gianandrea Mannarini, Mario Leonardo Salinas, Lorenzo Carelli, Nicola Petacco, and Josip Orović
Geosci. Model Dev., 17, 4355–4382, https://doi.org/10.5194/gmd-17-4355-2024, https://doi.org/10.5194/gmd-17-4355-2024, 2024
Short summary
Short summary
Ship weather routing has the potential to reduce CO2 emissions, but it currently lacks open and verifiable research. The Python-refactored VISIR-2 model considers currents, waves, and wind to optimise routes. The model was validated, and its computational performance is quasi-linear. For a ferry sailing in the Mediterranean Sea, VISIR-2 yields the largest percentage emission savings for upwind navigation. Given the vessel performance curve, the model is generalisable across various vessel types.
Soyoung Ha, Jonathan J. Guerrette, Ivette Hernández Baños, William C. Skamarock, and Michael G. Duda
Geosci. Model Dev., 17, 4199–4211, https://doi.org/10.5194/gmd-17-4199-2024, https://doi.org/10.5194/gmd-17-4199-2024, 2024
Short summary
Short summary
To mitigate the imbalances in the initial conditions, this study introduces our recent implementation of the incremental analysis update (IAU) in the Model for Prediction Across Scales – Atmospheric (MPAS-A) component coupled with the Joint Effort for Data assimilation Integration (JEDI) through the cycling system. A month-long cycling run demonstrates the successful implementation of the IAU capability in the MPAS–JEDI cycling system.
Federica Castino, Feijia Yin, Volker Grewe, Hiroshi Yamashita, Sigrun Matthes, Simone Dietmüller, Sabine Baumann, Manuel Soler, Abolfazl Simorgh, Maximilian Mendiguchia Meuser, Florian Linke, and Benjamin Lührs
Geosci. Model Dev., 17, 4031–4052, https://doi.org/10.5194/gmd-17-4031-2024, https://doi.org/10.5194/gmd-17-4031-2024, 2024
Short summary
Short summary
We introduce SolFinder 1.0, a decision-making tool to select trade-offs between different objective functions for optimal aircraft trajectories, including fuel use, flight time, NOx emissions, contrail distance, and climate impact. The module is included in the AirTraf 3.0 submodel and uses weather conditions simulated by the EMAC atmospheric model. This paper focuses on the ability of SolFinder to identify eco-efficient trajectories, reducing a flight's climate impact at limited cost penalties.
Ali Dashti, Jens C. Grimmer, Christophe Geuzaine, Florian Bauer, and Thomas Kohl
Geosci. Model Dev., 17, 3467–3485, https://doi.org/10.5194/gmd-17-3467-2024, https://doi.org/10.5194/gmd-17-3467-2024, 2024
Short summary
Short summary
This study developed new meshing workflows to enable the automatic generation of meshes that follow geological models. The workflow allows for importing several geological models as input for Gmsh and later exporting the same number of high-quality meshes. This way, geological uncertainty is directly included in the numerical simulations. This study evaluates the impact of the geological uncertainty on thermohydraulic performance of two reservoirs for high-temperature heat storage applications.
Wangbin Shen, Zhaohui Lin, Zhengkun Qin, and Juan Li
Geosci. Model Dev., 17, 3447–3465, https://doi.org/10.5194/gmd-17-3447-2024, https://doi.org/10.5194/gmd-17-3447-2024, 2024
Short summary
Short summary
In this study, a land surface image assimilation system capable of optimizing the spatial structure of the background field is constructed by introducing the curvelet analysis method and taking the similarity of image structure as a weak constraint. The findings demonstrate that the assimilation of surface soil moisture observation images effectively and reasonably enhances the spatial structure of soil moisture analysis field.
Luan Carlos de Sena Monteiro Ozelim, Michéle Dal Toé Casagrande, and André Luís Brasil Cavalcante
Geosci. Model Dev., 17, 3175–3197, https://doi.org/10.5194/gmd-17-3175-2024, https://doi.org/10.5194/gmd-17-3175-2024, 2024
Short summary
Short summary
The paper addresses synthetic dataset challenges in nonlinear constitutive modeling of soils, providing two datasets: one with 2000 soil types, 40 test conditions each (160 000 triaxial tests), and a second with 2048 soil types, 42 test conditions each (172 032 triaxial tests). Each dataset is a 4000×10 matrix applicable for multivariate forecasting and geotechnical simulations. In addition, a new Python code is introduced, empowering researchers to leverage Python packages for NorSand analyses.
Daniel Giles, Matthew M. Graham, Mosè Giordano, Tuomas Koskela, Alexandros Beskos, and Serge Guillas
Geosci. Model Dev., 17, 2427–2445, https://doi.org/10.5194/gmd-17-2427-2024, https://doi.org/10.5194/gmd-17-2427-2024, 2024
Short summary
Short summary
Digital twins of physical and human systems informed by real-time data are becoming ubiquitous across a wide range of settings. Progress for researchers is currently limited by a lack of tools to run these models effectively and efficiently. A key challenge is the optimal use of high-performance computing environments. The work presented here focuses on a developed open-source software platform which aims to improve this usage, with an emphasis placed on flexibility, efficiency, and scalability.
Stefan J. Miller, Paul A. Makar, and Colin J. Lee
Geosci. Model Dev., 17, 2197–2219, https://doi.org/10.5194/gmd-17-2197-2024, https://doi.org/10.5194/gmd-17-2197-2024, 2024
Short summary
Short summary
This work outlines a new solver written in Fortran to calculate the partitioning of metastable aerosols at thermodynamic equilibrium based on the forward algorithms of ISORROPIA II. The new code includes numerical improvements that decrease the computational speed (compared to ISORROPIA II) while improving the accuracy of the partitioning solution.
Fernanda Alvarado-Neves, Laurent Ailleres, Lachlan Grose, Alexander R. Cruden, and Robin Armit
Geosci. Model Dev., 17, 1975–1993, https://doi.org/10.5194/gmd-17-1975-2024, https://doi.org/10.5194/gmd-17-1975-2024, 2024
Short summary
Short summary
Previous work has demonstrated that adding geological knowledge to modelling methods creates more accurate and reliable models. Following this reasoning, we added constraints from magma emplacement mechanisms into existing modelling frameworks to improve the 3D characterisation of igneous intrusions. We tested the method on synthetic and real-world case studies, and the results show that our method can reproduce intrusion morphologies with no manual processing and using realistic datasets.
André R. Brodtkorb, Anna Benedictow, Heiko Klein, Arve Kylling, Agnes Nyiri, Alvaro Valdebenito, Espen Sollum, and Nina Kristiansen
Geosci. Model Dev., 17, 1957–1974, https://doi.org/10.5194/gmd-17-1957-2024, https://doi.org/10.5194/gmd-17-1957-2024, 2024
Short summary
Short summary
It is vital to know the extent and concentration of volcanic ash in the atmosphere during a volcanic eruption. Whilst satellite imagery may give an estimate of the ash right now (assuming no cloud coverage), we also need to know where it will be in the coming hours. This paper presents a method for estimating parameters for a volcanic eruption based on satellite observations of ash in the atmosphere. The software package is open source and applicable to similar inversion scenarios.
Kees Nederhoff, Maarten van Ormondt, Jay Veeramony, Ap van Dongeren, José Antonio Álvarez Antolínez, Tim Leijnse, and Dano Roelvink
Geosci. Model Dev., 17, 1789–1811, https://doi.org/10.5194/gmd-17-1789-2024, https://doi.org/10.5194/gmd-17-1789-2024, 2024
Short summary
Short summary
Forecasting tropical cyclones and their flooding impact is challenging. Our research introduces the Tropical Cyclone Forecasting Framework (TC-FF), enhancing cyclone predictions despite uncertainties. TC-FF generates global wind and flood scenarios, valuable even in data-limited regions. Applied to cases like Cyclone Idai, it showcases potential in bettering disaster preparation, marking progress in handling cyclone threats.
Younghun Kang and Ethan J. Kubatko
Geosci. Model Dev., 17, 1603–1625, https://doi.org/10.5194/gmd-17-1603-2024, https://doi.org/10.5194/gmd-17-1603-2024, 2024
Short summary
Short summary
Models used to simulate the flow of coastal and riverine waters, including flooding, require a geometric representation (or mesh) of geographic features that exhibit a range of disparate spatial scales from large, open waters to small, narrow channels. Representing these features in an accurate way without excessive computational overhead presents a challenge. Here, we develop an automatic mesh generation tool to help address this challenge. Our results demonstrate the efficacy of our approach.
Hui Wan, Kai Zhang, Christopher J. Vogl, Carol S. Woodward, Richard C. Easter, Philip J. Rasch, Yan Feng, and Hailong Wang
Geosci. Model Dev., 17, 1387–1407, https://doi.org/10.5194/gmd-17-1387-2024, https://doi.org/10.5194/gmd-17-1387-2024, 2024
Short summary
Short summary
Sophisticated numerical models of the Earth's atmosphere include representations of many physical and chemical processes. In numerical simulations, these processes need to be calculated in a certain sequence. This study reveals the weaknesses of the sequence of calculations used for aerosol processes in a global atmosphere model. A revision of the sequence is proposed and its impacts on the simulated global aerosol climatology are evaluated.
Christopher J. Vogl, Hui Wan, Carol S. Woodward, and Quan M. Bui
Geosci. Model Dev., 17, 1409–1428, https://doi.org/10.5194/gmd-17-1409-2024, https://doi.org/10.5194/gmd-17-1409-2024, 2024
Short summary
Short summary
Generally speaking, accurate climate simulation requires an accurate evolution of the underlying mathematical equations on large computers. The equations are typically formulated and evolved in process groups. Process coupling refers to how the evolution of each group is combined with that of other groups to evolve the full set of equations for the whole atmosphere. This work presents a mathematical framework to evaluate methods without the need to first implement the methods.
Tom Keel, Chris Brierley, and Tamsin Edwards
Geosci. Model Dev., 17, 1229–1247, https://doi.org/10.5194/gmd-17-1229-2024, https://doi.org/10.5194/gmd-17-1229-2024, 2024
Short summary
Short summary
Jet streams are an important control on surface weather as their speed and shape can modify the properties of weather systems. Establishing trends in the operation of jet streams may provide some indication of the future of weather in a warming world. Despite this, it has not been easy to establish trends, as many methods have been used to characterise them in data. We introduce a tool containing various implementations of jet stream statistics and algorithms that works in a standardised manner.
Amir Golparvar, Matthias Kästner, and Martin Thullner
Geosci. Model Dev., 17, 881–898, https://doi.org/10.5194/gmd-17-881-2024, https://doi.org/10.5194/gmd-17-881-2024, 2024
Short summary
Short summary
Coupled reaction transport modelling is an established and beneficial method for studying natural and synthetic porous material, with applications ranging from industrial processes to natural decompositions in terrestrial environments. Up to now, a framework that explicitly considers the porous structure (e.g. from µ-CT images) for modelling the transport of reactive species is missing. We presented a model that overcomes this limitation and represents a novel numerical simulation toolbox.
Stefan Hergarten
Geosci. Model Dev., 17, 781–794, https://doi.org/10.5194/gmd-17-781-2024, https://doi.org/10.5194/gmd-17-781-2024, 2024
Short summary
Short summary
The Voellmy rheology has been widely used for simulating snow and rock avalanches. Recently, a modified version of this rheology was proposed, which turned out to be able to predict the observed long runout of large rock avalanches theoretically. The software MinVoellmy presented here is the first numerical implementation of the modified rheology. It consists of MATLAB and Python classes, where simplicity and parsimony were the design goals.
Arjun Babu Nellikkattil, Danielle Lemmon, Travis Allen O'Brien, June-Yi Lee, and Jung-Eun Chu
Geosci. Model Dev., 17, 301–320, https://doi.org/10.5194/gmd-17-301-2024, https://doi.org/10.5194/gmd-17-301-2024, 2024
Short summary
Short summary
This study introduces a new computational framework called Scalable Feature Extraction and Tracking (SCAFET), designed to extract and track features in climate data. SCAFET stands out by using innovative shape-based metrics to identify features without relying on preconceived assumptions about the climate model or mean state. This approach allows more accurate comparisons between different models and scenarios.
Mohammad Mortezazadeh, Jean-François Cossette, Ashu Dastoor, Jean de Grandpré, Irena Ivanova, and Abdessamad Qaddouri
Geosci. Model Dev., 17, 335–346, https://doi.org/10.5194/gmd-17-335-2024, https://doi.org/10.5194/gmd-17-335-2024, 2024
Short summary
Short summary
The interpolation process is the most computationally expensive step of the semi-Lagrangian (SL) approach. In this paper we implement a new interpolation scheme into the semi-Lagrangian approach which has the same computational cost as a third-order polynomial scheme but with the accuracy of a fourth-order interpolation scheme. This improvement is achieved by using two third-order backward and forward polynomial interpolation schemes in two consecutive time steps.
Boris Gailleton, Luca C. Malatesta, Guillaume Cordonnier, and Jean Braun
Geosci. Model Dev., 17, 71–90, https://doi.org/10.5194/gmd-17-71-2024, https://doi.org/10.5194/gmd-17-71-2024, 2024
Short summary
Short summary
This contribution presents a new method to numerically explore the evolution of mountain ranges and surrounding areas. The method helps in monitoring with details on the timing and travel path of material eroded from the mountain ranges. It is particularly well suited to studies juxtaposing different domains – lakes or multiple rock types, for example – and enables the combination of different processes.
Denise Degen, Daniel Caviedes Voullième, Susanne Buiter, Harrie-Jan Hendricks Franssen, Harry Vereecken, Ana González-Nicolás, and Florian Wellmann
Geosci. Model Dev., 16, 7375–7409, https://doi.org/10.5194/gmd-16-7375-2023, https://doi.org/10.5194/gmd-16-7375-2023, 2023
Short summary
Short summary
In geosciences, we often use simulations based on physical laws. These simulations can be computationally expensive, which is a problem if simulations must be performed many times (e.g., to add error bounds). We show how a novel machine learning method helps to reduce simulation time. In comparison to other approaches, which typically only look at the output of a simulation, the method considers physical laws in the simulation itself. The method provides reliable results faster than standard.
Cited articles
Ardhuin, F., Chapron, B., and Collard, F.: Observation of swell dissipation
across oceans, Geophys. Res. Lett., 36, L06607, https://doi.org/10.1029/2008GL037030,
2009.
Ardhuin, F., Rogers, E., Babanin, A. V., Filipot, J.-F., Magne, R., Roland,
A., van der Westhuysen, A., Queffeulou, P., Lefevre, J.-M., Aouf, L., and
Collard, F.: Semiempirical dissipation source functions for ocean waves,
Part I: definition, calibration, and validation, J. Phys.
Oceanogr., 40, 1917–1941, https://doi.org/10.1175/2010JPO4324.1, 2010.
Bellprat, O., Kotlarski, S., Lüthi, D., and Schär, C.: Objective
calibration of regional climate models, J. Geophys. Res.-Atmos., 117, D23115,
https://doi.org/10.1029/2012JD018262, 2012.
Bidlot, J.-R.: Present status of wave forecasting at ECMWF, ECMWF
Workshop on Ocean Waves, European Centre for Medium-range Weather Forecasts,
25–27 June, 2012.
Brent, R.: Algorithms for Minimization without Derivatives, Prentice-Hall,
195 pp., 1972.
da Silva Santos, C. H., Gonçalves, M. S., and Hernandez-Figueroa, H. E.:
Designing novel photonic devices by bio-inspired computing, IEEE Photonic.
Tech. L., 22, 1177–1179, 2010.
Dee, D. P., Uppala, S. M., Simmons, A. J., Berrisford, P., Poli, P.,
Kobayashi, S., Andrae, U., Balmaseda, M. A., Balsamo, G., Bauer, P.,
Bechtold, P., Beljaars, A. C. M., van de Berg, I., Biblot, J., Bormann, N.,
Delsol, C., Dragani, R., Fuentes, M., Greer, A. J., Haimberger, L., Healy, S.
B., Hersbach, H., Holm, E. V., Isaksen, L., Kallberg, P., Kohler, M.,
Matricardi, M., McNally, A. P., Mong-Sanz, B. M., Morcette, J.-J., Park,
B.-K., Peubey, C., de Rosnay, P., Tavolato, C., Thepaut, J. N., and Vitart,
F.: The ERA-Interim reanalysis: Configuration and performance of the data
assimilation system, Q. J. Roy. Meteorol. Soc., 137, 553–597,
https://doi.org/10.1002/qj.828, 2011.
Duan, Q., Di, Z., Quan, J., Wang, C., Gong, W., Gan, Y., Ye, A., Miao, C.,
Miao, S., Liang, X., and Fan, S.: Automatic model calibration: a new way to
improve numerical weather forecasting, B. Am. Meteorol. Soc., 98, 959–970,
https://doi.org/10.1175/bams-d-15-00104.1, 2017.
Filipot, J.-F. and Ardhuin, F.: A unified spectral parameterization for wave
breaking: From the deep ocean to the surf zone, J. Geophys. Res., 117,
C00J08, https://doi.org/10.1029/2011jc007784, 2012.
Gablonsky, J. M. and Kelley, C. T.: A locally-biased form of the DIRECT
algorithm, J. Global Optimization, 21, 27–37, 2001.
Grant, W. D. and Madsen, O. S.: Combined wave and current interaction with a
rough bottom, J. Geophys. Res., 84, 1797–1808, 1979.
Hasselmann, K.: On the non-linear energy transfer in a gravity-wave spectrum,
Part 1. General theory, J. Fluid Mech., 12, 481–500, 1962.
Hasselmann, S., Hasselmann, K., Allender, J. H., and Barnett, T. P.:
Computations and parameterizations of the nonlinear energy transfer in a
gravity wave spectrum, Part II: Parameterizations of the nonlinear energy
transfer for application in wave models, J. Phys. Oceanogr., 15, 1378–1391,
1985.
Hendrix, E. M. T., Ortigosa, P. M., and García, I.: On success rates for
controlled random search, J. Global Optim., 21, 239–263,
https://doi.org/10.1023/a:1012387510553, 2001.
Hourdin, F., Mauritsen, T., Gettelman, A., Golaz, J.-C., Balaji, V., Duan,
Q., Folini, D., Ji, D., Klocke, D., Qian, Y., Rauser, F., Rio, C., Tomassini,
L., Watanabe, M., and Williamson, D.: The art and science of climate model
tuning, B. Am. Meteorol. Soc., 98, 589–602, https://doi.org/10.1175/bams-d-15-00135.1,
2017.
Janssen, P. A. E. M.: Quasilinear approximation for the spectrum of
wind-generated surface waves, J. Fluid Mech., 117, 493–506, 1982.
Janssen, P. A. E. M.: Quasi-linear theory of wind wave generation applied to
wave forecasting, J. Phys. Oceanogr., 21, 1631–1642, 1991.
Johnson, S. G.: The NLopt nonlinear-optimization package (Version 2.4.2),
available at: http://ab-initio.mit.edu/nlopt, 2014.
Jones, D. R., Perttunen, C. D., and Stuckmann, B. E.: Lipschitzian
optimization without the lipschitz constant, J. Optimiz. Theory App., 79,
157–181, 1993.
Kaelo, P. and Ali, M. M.: Some variants of the controlled random search
algorithm for global optimization, J. Optim. Theory Appl., 130, 253–264,
2006.
Kahma, K. K. and Calkoen, C. J.: Reconciling discrepancies in the observed
growth of wind-generated waves, J. Phys. Oceanogr., 22, 1389–1405,
https://doi.org/10.1175/1520-0485(1992)022<1389:RDITOG>2.0.CO;2, 1992.
Miles, J. W.: On the generation of surface waves by shear flows, J. Fluid
Mech., 3, 185–204, 1957.
Nelder, J. A. and Mead, R.: A simplex method for function minimization,
Comput. J., 7, 308–313, 1965.
Powell, M. J. D.: A direct search optimization method that models the
objective and constraint functions by linear interpolation, in: Advances in
Optimization and Numerical Analysis, edited by: Gomez, S. and Hennart, J.-P.,
Kluwer Academic, Dordrecht, 51–67, 1994.
Powell, M. J. D.: The NEWUOA software for unconstrained optimization without
derivatives, in: Large-Scale Nonlinear Optimization, Nonconvex Optimization
and Its Applications, edited by: Di Pillo G. and Roma M., vol 83, Springer,
Boston, MA, 255–297, https://doi.org/10.1007/0-387-30065-1_16, 2006
Powell, M. J. D.: The BOBYQA algorithm for bound constrained optimization
without derivatives, Department of Applied Mathematics and Theoretical
Physics, Cambridge, England, 39 pp., 2009.
Price, W. L.: Global optimization by controlled random search, J. Optim.
Theory Appl., 40, 333–348, 1983.
Queffeulou, P.: Long-Term Validation of Wave Height Measurements from
Altimeters, Mar. Geod., 27, 495–510, https://doi.org/10.1080/01490410490883478, 2004.
Rinnooy Kan, A. H. G. and Timmer, G. T.: Stochastic global optimization
methods, Math. Program., 39, 27–78, 1987.
Rios, L. M. and Sahinidis, N. V.: Derivative-free optimization: a review of
algorithms and comparison of software implementations, J. Global Optim., 56,
1247–1293, https://doi.org/10.1007/s10898-012-9951-y, 2012.
Roach, L. A., Tett, S. F. B., Mineter, M. J., Yamazaki, K., and Rae, C. D.:
Automated parameter tuning applied to sea ice in a global climate model,
Clim. Dynam., 50, 51–65, https://doi.org/10.1007/s00382-017-3581-5, 2017.
Rowan, T.: Functional Stability Analysis of Numerical Algorithms, PhD Thesis,
Department of Computer Sciences, University of Texas at Austin, Austin,
Texas, USA, 206 pp., 1990.
Runarsson, T. P. and Yao, X.: Search biases in constrained evolutionary
optimization, IEEE T. Syst. Man. Cy. C, 35, 233–243, 2005.
Seong, C., Her, Y., and Benham, B.: Automatic Calibration Tool for Hydrologic
Simulation Program-FORTRAN Using a Shuffled Complex Evolution Algorithm,
Water, 7, 503–527, 2015.
Severijns, C. A. and Hazeleger, W.: Optimizing Parameters in an Atmospheric
General Circulation Model, J. Climate, 18, 3527–3535,
https://doi.org/10.1175/jcli3430.1, 2005.
Tett, S. F. B., Mineter, M. J., Cartis, C., Rowlands, D. J., and Liu, P.: Can
Top-of-Atmosphere Radiation Measurements Constrain Climate Predictions? Part
I: Tuning, J. Climate, 26, 9348–9366, https://doi.org/10.1175/JCLI-D-12-00595.1, 2013.
Tett, S. F. B., Yamazaki, K., Mineter, M. J., Cartis, C., and Eizenberg, N.:
Calibrating climate models using inverse methods: case studies with HadAM3,
HadAM3P and HadCM3, Geosci. Model Dev., 10, 3567–3589,
https://doi.org/10.5194/gmd-10-3567-2017, 2017.
Tolman, H. L.: Validation of WAVEWATCH III version 1.15 for a global domain,
NOAA/NWS/NCEP/OMB, Technical Note Technical Note 213, 33 pp., 2002.
Tolman, H. L.: User manual and system documentation of WAVEWATCH-III version
4.18, NOAA/NWS/NCEP/OMB, Technical Note Technical Note 316, 282 pp., 2014.
Tolman, H. L. and Chalikov, D.: Source terms in a third-generation wind wave
model, J. Phys. Oceanogr., 26, 2497–2518, 1996.
Tracy, B. A. and Resio, D. T.: Theory and calculations of the nonlinear
energy transfer between sea waves in deep water, US Army Engineer Waterways
Experiment Station, Vicksburg, MS, WES Report 11, 1982.
van Vledder, G. P., Herbers, T. H. C., Jensen, R., Resio, D., and Tracy, B.:
Modeling of nonlinear quadruplet wave-wave interactions in operational
coastal wave models, Proceedings of the 27th International Conference on
Coastal Engineering, Sydney, Australia, 16–21 July 2000, 797–811, 2000.
Voosen, P.: Climate scientists open up their black boxes to scrutiny,
Science, 354, 401–402, https://doi.org/10.1126/science.354.6311.401, 2016.
Wang, C., Duan, Q., Gong, W., Ye, A., Di, Z., and Miao, C.: An evaluation of
adaptive surrogate modeling based optimization with two benchmark problems,
Environ. Model. Softw., 60, 167–179, https://doi.org/10.1016/j.envsoft.2014.05.026,
2014.
Webb, D. J.: Nonlinear transfer between sea waves, Deep-Sea Res., 25,
279–298, 1978.
Short summary
We describe an optimisation suite ("Cyclops") that can be used to apply a selection of nonlinear optimisation algorithms to "tune" the parameters of a geophysical model. Based on the Cylc workflow engine, Cyclops can be used to calibrate any modelling system that has itself been implemented as a (separate) Cylc model suite, provided it includes computation and output of the desired scalar cost function.
We describe an optimisation suite ("Cyclops") that can be used to apply a selection of nonlinear...
