The daily cycle of sea surface temperature (SST) impacts clouds above the ocean and could influence the clustering of thunderstorms linked to extreme rainfall and hurricanes. However, daily SST variability is often poorly represented in modeling studies of how clouds cluster. We present a simple, wind-responsive model of upper-ocean temperature for use in atmospheric simulations. Evaluating the model against observations, we show that it performs significantly better than common slab models.

pyBL is an open-source package for generating realistic rainfall time series based on the Bartlett–Lewis (BL) model. It can preserve not only standard but also extreme rainfall statistics across various timescales. Notably, compared to traditional frequency analysis methods, the BL model requires only half the record length (or even shorter) to achieve similar consistency in estimating sub-hourly rainfall extremes. This makes it a valuable tool for modelling rainfall extremes with short records.

A coupled fine-resolution ocean–ice model is developed for the Ross Sea and adjacent regions in Antarctica, a key area for the formation of global ocean bottom water, the Antarctic Bottom Water (AABW), which affects global ocean circulation. The model has a high skill level in simulating sea ice production driving the AABW source water formation and AABW properties when assessed against observations. A model experiment shows a significant impact of ice shelf melting on the AABW characteristics.

Leaky wooden dams are a type of natural flood management intervention that aims to reduce flood risk downstream by temporarily holding back water during a storm event and releasing it afterwards. These structures alter the river hydrology, and therefore the geomorphology, yet often this is excluded from numerical models. Here we show that by not simulating geomorphology, we are currently underestimating the efficacy of these structures to reduce the flood peak and store water.

Safe carbon dioxide (CO₂) storage is likely to be critical for mitigating some of the most severe effects of climate change. We present a simulation framework for modeling CO₂ storage beneath the seafloor, where CO₂ can form a solid. This can aid in permanent CO₂ storage for long periods of time. Our models show what a commercial-scale CO₂ injection would look like in a marine environment. We discuss what would need to be considered when designing a subsea CO₂ injection.

We integrate the E3SM Land Model (ELM) with the WRF model through the Lightweight Infrastructure for Land Atmosphere Coupling (LILAC) Earth System Modeling Framework (ESMF). This framework includes a top-level driver, LILAC, for variable communication between WRF and ELM and ESMF caps for ELM initialization, execution, and finalization. The LILAC–ESMF framework maintains the integrity of the ELM's source code structure and facilitates the transfer of future ELM model developments to WRF-ELM.

Earth and other planets deform under various forces. Numerical modeling is critical in understanding the nature of various dynamic deformation processes. This article introduces a newly developed open-source package, CitcomSVE-3.0, which efficiently solves the viscoelastic deformation of planetary bodies. We present benchmark results against a semi-analytical code. With its accuracy and efficiency, CitcomSVE-3.0 could advance research in planetary and climatic sciences.

We present the Water Table Model (WTM), a new model for simulating groundwater and lake levels at continental scales over millennia. The WTM enables long-term evaluations of water-table changes. As a proof of concept, we simulate the North American water table for the present and the Last Glacial Maximum (LGM), showing that North America held more groundwater and lake water during the LGM than it does today – enough to lower sea levels by 14.98 cm. The open-source code is available on GitHub.

The Global Navigation Satellite System (GNSS) is widely used for real-time monitoring and early warning of geohazards. Accurate modeling of tropospheric delays is critical to achieving high-precision GNSS solutions, and using external delays can improve real-time GNSS convergence times. Current empirical delay models only provide delay but not uncertainty. We propose a global empirical delay model with uncertainty and demonstrate its benefits in accelerating GNSS positioning convergence.

The Community Inversion Framework (CIF) brings together methods for estimating greenhouse gas fluxes from atmospheric observations. The initial ensemble method implemented in CIF was found to be incomplete and could hardly be compared to other ensemble methods employed in the inversion community. In this paper, we present and evaluate a new implementation of the ensemble mode, building upon the initial developments.

Most works have delved into convective weather nowcasting, and only a few works have discussed the nowcasting uncertainty for variables at the surface level. Hence, we proposed a method to estimate uncertainty. Generating appropriate noises associated with the characteristic of the error in analysis can simulate the uncertainty of nowcasting. This method can contribute to the estimation of near–surface analysis uncertainty in both nowcasting applications and ensemble nowcasting development.

Most of the tools available to model sediment transport do not account for complex physical mechanisms such as surface-wave-driven processes. In this study, a new model, sedInterFoam, allows us to reproduce numerically complex configurations in order to investigate coastal sediment transport applications dominated by surface waves and to gain insight into the complex physical processes associated with breaking waves and morphodynamics.

emIAM v1.0 is a new emulator for integrated assessment models (IAMs) using global and regional time-independent marginal abatement cost (MAC) curves for multiple greenhouse gases, optionally with time-dependent MAC curves for enhanced accuracy. Combined with climate emulators, emIAM enables development of cost-effective, multi-IAM emission pathways directly linked to temperature targets at low computational cost.

Version 2.1 of the U.S. Department of Energy's Energy Exascale Earth System Model (E3SM) adds the Fox-Kemper et al. (2011) mixed-layer eddy parameterization, which restratifies the ocean surface layer through an overturning streamfunction. Results include surface layer bias reduction in temperature, salinity, and sea ice extent in the North Atlantic; a small strengthening of the Atlantic meridional overturning circulation; and improvements to many atmospheric climatological variables.

The study describes the updates of NOAA's current UFS-AQMv7 air quality forecast model by incorporating the latest scientific and structural changes in CMAQv5.4. An evaluation during the summer of 2023 shows that the updated model overall improves the simulation of MDA8 O₃ by reducing the bias by 8%–12% in the contiguous US. PM_2.5 predictions have mixed results due to wildfire, highlighting the need for future refinements.

It is computationally expensive to infer greenhouse gas (GHG) emissions using atmospheric observations. This is partly due to the detailed model used to represent atmospheric transport. We demonstrate how a machine learning (ML) model can be used to simulate high-resolution atmospheric transport. This type of ML model will help estimate GHG emissions using dense observations, which are becoming increasingly common with the proliferation of urban monitoring networks and geostationary satellites.

Ice sheet models can help predict how Antarctica's ice sheets respond to environmental change, and such models benefit from comparison to geological data. Here, we use an ice sheet model output and other data to predict the erosion of debris and trace its transport to where it is deposited on the ocean floor. This allows the results of ice sheet modelling to be directly and quantitively compared to real-world data, helping to reduce uncertainty regarding Antarctic sea level contribution.

Hydrologists are often faced with selecting amongst a set of competing models with different numbers of parameters and ability to fit available data. Bayes’ factor is a tool that can be used to compare models; however, it is very difficult to compute Bayes' factor numerically. In our paper, we explore and develop highly efficient algorithms for computing Bayes’ factor of hydrological systems, which will introduce this useful tool for selecting models into everyday hydrological practice.

Superwell is a physics-based hydro-economic model that estimates the production costs and availability of groundwater worldwide. It calculates how much groundwater can be extracted and at what cost, using detailed maps and data of the Earth's properties. Through these estimates, and by using them with other models, Superwell facilitates exploration of coupled human–environmental system challenges, such as future water supply sustainability or multi-sectoral energy–water–land feedbacks.

This study evaluates the performance of four planetary boundary layer (PBL) schemes in near-surface wind fields over the Sichuan Basin, China. Using 112 sensitivity experiments with the Weather Research and Forecasting (WRF) model and focusing on 28 wind events, it is found that wind direction was less sensitive to the PBL schemes. The quasi-normal scale elimination (QNSE) scheme captured temporal variations best, while the Mellor–Yamada–Janjić (MYJ) scheme had the least error in wind speed.

We present PRIME (Probabilistic Regional Impacts from Model patterns and Emissions), which is designed to take new emissions scenarios and rapidly provide regional impact information. PRIME allows large ensembles to be run on multi-centennial timescales, including the analysis of many important variables for impact assessments. Our evaluation shows that PRIME reproduces the climate response for known scenarios, providing confidence in using PRIME for novel scenarios.

Particles in the Earth's atmosphere strongly impact the planet's energy budget, and atmosphere simulations require accurate representation of their interaction with light. This work introduces two approaches to represent light scattering by small particles. The first is a scattering simulator based on Mie theory implemented in Python. The second is a neural network emulator that is more accurate than existing methods and is fast enough to be used in climate and weather simulations.

Accurately measuring snow height is key for modeling approaches in climate science, snow hydrology, and avalanche forecasting. Erroneous snow height measurements often occur when snow height is low or changes, for instance during snowfall in summer. We prepare a new benchmark dataset with annotated snow height data and demonstrate how to improve the measurement quality using modern deep-learning approaches. Our approach can be easily implemented in a data pipeline for snow modeling.

Nowcasting models struggle with the rapid evolution of heavy rain, and common verification methods are unable to describe how accurately the models predict the growth and decay of heavy rain. We propose a framework to assess model performance. In the framework, convective cells are identified and tracked in the forecasts and observations, and the model skill is then evaluated by comparing differences between forecast and observed cells. We demonstrate the framework with four open-source models.

The High-Resolution Global Forecast Model (HGFM) is an advanced iteration of the operational Global Forecast System (GFS) model. HGFM can produce forecasts at a spatial scale of ~6 km in tropics. It demonstrates improved accuracy in short- to medium-range weather prediction over the Indian region, with notable success in predicting extreme events. Further, the model will be entrusted to operational forecasting agencies after validation and testing.